Banner Engineering S15C Current Monitoring Sensors
Banner Engineering S15C Current Monitoring Sensors convert a high-voltage input to a proportional low-voltage and low-current signal for measuring and monitoring. These connectors use split-core current transformers to monitor AC currents for various devices. Splitcore current transformers are ideal for installation on existing electrical wiring because they can snap around individual conductors without disconnecting any cables. The S15C sensors connect to the included current transformers and output the values to Modbus registers or IO-link process data.
Features
- Connects to the three included current transformers and outputs the values to Modbus registers/IO-Link process data
- Monitors AC current for various devices using current transformers
- Converts a high-voltage input to a proportional low-voltage, low-current signal for measuring and monitoring
Specifications
- 10VDC to 30VDC at 50mA maximum supply voltage range
- 4A maximum power pass-through current
- Protected against reverse polarity and transient voltages
- 400µA leakage current immunity
- 12-bits resolution
- Indicators:
- Green power
- Amber Modbus communications or Amber IO-Link communications
- Integral male/female 4-pin M12 quick-disconnect connector
- Construction:
- Nickel-plated brass coupling material
- PVC translucent black connector body
- Vibration and mechanical shock:
- Meets IEC 60068-2-6 requirements (vibration: 10Hz to 55Hz, 0.5mm amplitude, 5-minutes sweep, and 30-minutes dwell)
- Meets IEC 60068-2-27 requirements (shock: 15G 11ms duration and half sine wave)
- Environmental rating:
- IP65, IP67, and IP68
- UL Type 1
Wiring and Installations
Additional Resources
Related Products
Banner Engineering S15C Series In-Line Converters
Takes various types of signals, such as discrete, analog, & RTD, & turns them into smart protocols.
Banner Engineering Asset Monitoring Gateways with SNAP ID
Features SNAP ID that provides commissioning, monitoring, and alarms for up to 20 sensors.
Related Solutions
Banner Engineering Condition Monitoring Sensor Solutions
Wired and wireless sensors that provide real-time insights into equipment health.