SparkFun Electronics Tools & Supplies

Results: 1,017
Select Image Part #
 Mfr.
Description Datasheet Availability Pricing (EUR) Filter the results in the table by unit price based on your quantity.
Qty. RoHS
SparkFun SparkFun Accessories Alligator Test Leads Multicolored 10 pac 179In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Snappable Protoboard Protoboard 13In Stock
26Expected 17/09/2026
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Enclosure-Aluminum 120x94.5x34mm 15In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Teensy Header Kit 11In Stock
50On Order
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Jumper Wires Premium 4 in M/M-26 AWG 30P 27In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories ESP32 Thing Stackable Header Set
Datasheet
265In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Large Jumper Wire Kit - 700pcs 9In Stock
7Expected 17/09/2026
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This is a super small 2x5 pin male PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each other and can be cut down to smaller increments if the need arises.
Datasheet
138In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Here is a tiny 4-pin Qwiic 1mm JST connector. This connector mounts to allow you to connect your cable vertically great for tight spaces. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based device com
Datasheet
432In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This header kit is designed specifically for the larger Teensy 4.1 Teensy 3.6 and Teensy 3.5 development boards offering "stackable" headers with extra-long female pins. When soldered to your Teensy these headers make the board fully compatible w
Datasheet
110In Stock
140On Order
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This is a 100mm long 4-conductor cable with 1mm JST termination. It s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from a highly malleable material making it more
Datasheet
439In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This is a simple and easy to use battery box for powering the micro:bit Board. It accepts two AAA batteries and plugs directly into the board via a JST Connector. 6In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Here for all your mechatronic needs is a simple high quality continuous continuous rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min.A standard 3-pin power and control cable is attach
Datasheet
23In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories The DG01D-E is a single hobby motor with a hall speed encoder. This motor requires a voltage between 3-9V has a gearbox ratio of 1:48 and a speed of 90RPM at 4.5V. The voltage between positive and negative is determined according to the power supply
Datasheet
20In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Thermocouple Type-K Glass Braid Insulate 20In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This straight bar load cell (sometimes called a strain gauge) can translate up to 10kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to and proportional of the st
Datasheet
98In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Load Cell - 200kg, S-Type (TAS501)
Datasheet
5In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories The SparkFun H3LIS331DL Triple Axis Accelerometer Breakout is a low-power high-g accelerometer with I2C and SPI interface options. Though not necessarily good at detecting minute changes the H3LIS331DL is great for grueling conditions that normal a
Datasheet
31In Stock
63Expected 17/09/2026
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories The AT42QT1011 Capacitive Touch Breakout offers a single capacitive touch button with easy-to-use digital I/O pins.The AT42QT1011 is a dedicated, single-button capacitive sense chip. The chip handles monitoring a conductive area for touch.
Datasheet
79In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Load Cell - 5kg, Strght Bar(TAL220B)
Datasheet
54In Stock
34Expected 24/09/2026
Min.: 1
Mult.: 1



SparkFun SparkFun Accessories The SparkFun Photodetector Breakout is an updated version of the SparkFun Particle Sensor Breakout which includes the MAX30101 a highly sensitive optical sensor that succeeds the MAX30105 and MAX30102. The MAX30101 Breakout utilizes a photodio
Datasheet
4In Stock
38Expected 16/10/2026
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Always always always wear eye protection while soldering. This is a golden rule we all know but sometimes overlook. Luckily with these SparkFun Safety Glasses you'll have a pair of lightweight economical and stylish lenses to protect your precio 12In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is your basic spool of leaded solder with a 63/37 water soluble resin core. 0.031" gauge and 100 grams. This is a good spool for more advanced users that should last 6-12 months depending on how often you solder. Mix: 63% Sn / 37% Pb 4In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a solderer's best helper the third hand. Comes with a heavy base two alligator clips a soldering iron holder and a good magnifying glass. Note that we don't normally need a third hand. It's nice but soldering flat on a table works just f 26In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories You can tell by our large assortment of tweezers that we here at SparkFun are way into picking up tiny things. To make sure we're always up to date on the latest in 'tweezing' technology we're always buying and testing new tweezers. Okay... tweezers 41In Stock
Min.: 1
Mult.: 1