Tools & Supplies

Results: 1,017
Select Image Part #
 Mfr.
Description Datasheet Availability Pricing (EUR) Filter the results in the table by unit price based on your quantity.
Qty. RoHS
SparkFun SparkFun Accessories USB Female Type B Connector 26In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Single row of 30-holes female header with swiss round machined pins. These units have very high quality round pins to accept and retain machine pin headers much better. Can be cut to size with a pair of wire-cutters. Standard .1" spacing. We use the 141In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin Molex connector with 0.1" spacing on one end bare cable on the opposite end. It also comes with the mating connector for the Molex.D
Datasheet
243In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Screw Terminals 2.54mm Pitch 2-Pin 69In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This barrel jack plug is great for adding a common connector to the end of our wires. This jack is compatible with 5.5mm barrel jacks that have a 2.1mm center pole diameter. The outer shell unscrews to reveal solder terminals and a crimp strain relie 111In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories DC Barrel Power Jack Connector SMD
Datasheet
81In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Stackable Header 3 Pin, Female 0.1in 91In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories These are simple 6-position screw terminals with 2.54mm pitch pins. Rated up to 150V @ 6A this terminal can accept 30 to 18AWG wire. The 2.54mm pitch will line up with standard 0.1" perf boards.
Datasheet
14In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Piezo Element 108In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Mini Diagonal Cutters. These are great little cutters! A must have for clipping leads and extra solder tails. 4" long. 19In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is your basic spool of leaded solder with a 63/37 water soluble resin core. 0.031" gauge and 100 grams. This is a good spool for more advanced users that should last 6-12 months depending on how often you solder. Mix: 63% Sn / 37% Pb 4In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories We don't say this lightly: this might be the best solder on the market! There we said it. This "Special Blend" wasn't just picked from a catalog; it is the result of a quest to find the perfect alloy for our own production lines here at SparkFun. Af 3In Stock
Min.: 1
Mult.: 1
SparkFun Educational Kits We love heat shrink! We use it for all sorts of handy projects. Use it to reinforce connections protect devices and electrically isolate exposed solder joints. We worked with a manufacturer to create a kit that we would use: lots of colors lots of 24In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This USB 2.0 Type-C cable is perfect for use with your Raspberry Pi 4 and other USB Type C boards. USB Type-C Connectors and Cable Assemblies offer greater PCB savings while enabling high-frequency mating in data consumer and other I/O applications
Datasheet
258In Stock
Min.: 1
Mult.: 1
No
SparkFun SparkFun Accessories USB Mini-B Cable 6"
270In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This little round on/off/on toggle switch is rated up to 10A at 125VAC and can be panel mounted in a 20mm diameter hole. It ll also look pretty slick in your project! 119In Stock
Min.: 1
Mult.: 1
No
SparkFun SparkFun Accessories If you want to get some sound out of your project but have a tight space budget this is a good way to do it. This 0.5W 8Ohm speaker is only 40mm in diameter and just over 4mm thick the same kind you might find in one of those "talking greeting car
Datasheet
260In Stock
Min.: 1
Mult.: 1
No
SparkFun SparkFun Accessories A small 1/4 wave rubber duck antenna for LoRa or other 860-960MHz communication. Antenna has a center frequency of 915MHz and utilizes an RP-SMA connector. Gain is 2dBi with an overall length of 110mm.
7In Stock
Min.: 1
Mult.: 1
No
SparkFun SparkFun Accessories Antenna GPS Embedded SMA 43In Stock
187On Order
Min.: 1
Mult.: 1
No
SparkFun SparkFun Accessories This is the one inch version of the SparkFun LuMini LED Ring packed with 20 individually addressable LEDs each capable of producing 16 million colors it provides you with a lot of color for just about any reason! LuMini is a miniaturized version o
Datasheet
27In Stock
Min.: 1
Mult.: 1
No
SparkFun SparkFun Accessories It's not what project you have in mind that may use a rocket launch switch... The question is what project will you come up with once you have one in hand? Everyone has a proverbial missile to launch. The hot red safety cover protects a toggle switc 55In Stock
Min.: 1
Mult.: 1
No
SparkFun SparkFun Accessories This is a unique two-cell AAA battery holder built specifically for the BBC micro:bit. The 6" ( 150mm) cable has been terminated with a JST-PH connector.The connector mates the JST socket on the micro:bit perfectly allowing you to easily make your p 33In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories The SparkFun Single Supply Logic Level Converter is logic level and power supply translator in one small package. This little board breaks out the Texas Instruments TXB0104 4-bit bi-directional voltage-level translator with automatic direction sensin 16In Stock
Min.: 1
Mult.: 1
No
SparkFun SparkFun Accessories Cherry MX switches are great for building your own keyboards. Whether you are looking to build a full sized 108-key keyboard your own 10-key or just a custom input for your computer Cherry MX switches give you that satisfying keyboard click. Now we
Datasheet
281In Stock
Min.: 1
Mult.: 1
No
SparkFun SparkFun Accessories Increase your range with this 1/2 wave duck antenna. Designed for 860 to 960MHz it is ideal for distant LoRa nodes. Utilizes an RP-SMA connector and is 200mm long.
Datasheet
5In Stock
Min.: 1
Mult.: 1
No