|
|
Signal Conditioning The HLM-40ABH is a wide bandwidth GaAs Schottky diode signal limiter featuring high IP3 and medium power handling. It offers low insertion loss and low return loss from DC through Ka band and has a typical 1dB compression point of 9dBm.
- HLM-40ABH
- Marki Microwave
-
1:
€1,090.68
-
3Expected 18/02/2027
-
New Product
|
Mouser Part No
10-HLM-40ABH
New Product
|
Marki Microwave
|
Signal Conditioning The HLM-40ABH is a wide bandwidth GaAs Schottky diode signal limiter featuring high IP3 and medium power handling. It offers low insertion loss and low return loss from DC through Ka band and has a typical 1dB compression point of 9dBm.
|
|
3Expected 18/02/2027
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
0 Hz to 40 GHz
|
0 Hz to 40 GHz
|
|
|
Connector
|
|
- 55 C
|
+ 100 C
|
|
|
|
|
Signal Conditioning The HLM-8011 is a high-power GaAs Schottky diode signal limiter featuring high IP3 and high power handling. It offers low insertion loss and low return loss from DC through Ka band and has a typical 1dB compression point of +9dBm.
- HLM-8011U
- Marki Microwave
-
1:
€2,043.10
-
4Expected 01/02/2027
-
New At Mouser
|
Mouser Part No
10-HLM-8011U
New At Mouser
|
Marki Microwave
|
Signal Conditioning The HLM-8011 is a high-power GaAs Schottky diode signal limiter featuring high IP3 and high power handling. It offers low insertion loss and low return loss from DC through Ka band and has a typical 1dB compression point of +9dBm.
|
|
4Expected 01/02/2027
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
0 Hz to 30 GHz
|
0 Hz to 30 GHz
|
|
|
Connector
|
|
- 55 C
|
+ 100 C
|
|
|
|
|
Signal Conditioning This equalizer provides 7.8 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 10 dB and a 50-ohm match maintained over the entire operating range.
- MEQ10-60ABH
- Marki Microwave
-
1:
€750.61
-
2Expected 26/10/2026
-
New Product
|
Mouser Part No
10-MEQ10-60ABH
New Product
|
Marki Microwave
|
Signal Conditioning This equalizer provides 7.8 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 10 dB and a 50-ohm match maintained over the entire operating range.
|
|
2Expected 26/10/2026
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Signal Conditioning MM1-0212L is a low power GaAs MMIC double balanced mixer that operates at LO powers as a low as +1 dBm. MM1-0212L is a low frequency, low power S band mixer that works well as both an up and down converter to through X band.
- MM1-0212LS
- Marki Microwave
-
1:
€538.38
-
6On Order
-
New At Mouser
|
Mouser Part No
10-MM1-0212LS
New At Mouser
|
Marki Microwave
|
Signal Conditioning MM1-0212L is a low power GaAs MMIC double balanced mixer that operates at LO powers as a low as +1 dBm. MM1-0212L is a low frequency, low power S band mixer that works well as both an up and down converter to through X band.
|
|
6On Order
On Order:
2 Expected 28/12/2026
4 Expected 08/01/2027
Factory Lead Time:
18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Mixers
|
0 Hz to 3 GHz, 2 GHz to 12 GHz
|
0 Hz to 3 GHz, 2 GHz to 12 GHz
|
|
50 Ohms
|
Connector
|
|
- 55 C
|
+ 100 C
|
|
|
|
|
Signal Conditioning MM1-0222L is a GaAs MMIC double balanced mixer that features excellent conversion loss, superior isolations, and spurious performance across a broad bandwidth. The MM1 0222L works well as both an up and down converter through the Ku band and beyond.
- MM1-0222LS
- Marki Microwave
-
1:
€810.97
-
10On Order
-
New At Mouser
|
Mouser Part No
10-MM1-0222LS
New At Mouser
|
Marki Microwave
|
Signal Conditioning MM1-0222L is a GaAs MMIC double balanced mixer that features excellent conversion loss, superior isolations, and spurious performance across a broad bandwidth. The MM1 0222L works well as both an up and down converter through the Ku band and beyond.
|
|
10On Order
On Order:
3 Expected 04/02/2027
7 Expected 23/04/2027
Factory Lead Time:
18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Mixers
|
0 Hz to 3.5 GHz, 2 GHz to 22 GHz
|
0 Hz to 3.5 GHz, 2 GHz to 22 GHz
|
|
50 Ohms
|
Connector
|
|
- 55 C
|
+ 100 C
|
|
|
|
|
Signal Conditioning The MM1-0626H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.
- MM1-0626HS
- Marki Microwave
-
1:
€674.69
-
12On Order
-
New At Mouser
|
Mouser Part No
10-MM1-0626HS
New At Mouser
|
Marki Microwave
|
Signal Conditioning The MM1-0626H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.
|
|
12On Order
On Order:
2 Pending
5 Expected 29/01/2027
5 Expected 18/02/2027
Factory Lead Time:
18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Mixers
|
|
0 Hz to 9 GHz, 6 GHz to 26.5 GHz
|
|
50 Ohms
|
Connector
|
|
- 55 C
|
+ 100 C
|
|
|
|
|
Signal Conditioning The MM2-0530H is a passive MMIC triple balanced mixer. It features a broadband IF port that spans from 2 to 20 GHz, and has excellent spurious suppression. The MM2-0530H is available as a wire bondable chip or connectorized SMA package.
- MM2-0530HS
- Marki Microwave
-
1:
€1,022.24
-
2Expected 08/02/2027
-
New At Mouser
|
Mouser Part No
10-MM2-0530HS
New At Mouser
|
Marki Microwave
|
Signal Conditioning The MM2-0530H is a passive MMIC triple balanced mixer. It features a broadband IF port that spans from 2 to 20 GHz, and has excellent spurious suppression. The MM2-0530H is available as a wire bondable chip or connectorized SMA package.
|
|
2Expected 08/02/2027
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Signal Conditioning The MM2-0530L is a passive MMIC triple balanced mixer. It features a broadband IF port that spans from 2 to 20 GHz, and has excellent spurious suppression. The MM2-0530L is available as a wire bondable chip or connectorized SMA package.
- MM2-0530LS
- Marki Microwave
-
1:
€1,013.13
-
3Expected 31/12/2026
-
New At Mouser
|
Mouser Part No
10-MM2-0530LS
New At Mouser
|
Marki Microwave
|
Signal Conditioning The MM2-0530L is a passive MMIC triple balanced mixer. It features a broadband IF port that spans from 2 to 20 GHz, and has excellent spurious suppression. The MM2-0530L is available as a wire bondable chip or connectorized SMA package.
|
|
3Expected 31/12/2026
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Mixers
|
|
|
|
|
Connector
|
|
- 55 C
|
+ 100 C
|
|
|
|
|
Signal Conditioning MMIQ-0218H is a low LO drive, passive GaAs MMIC IQ mixer that operates across a 9:1 bandwidth. This is an ultra-broadband mixer spanning 2 to 18GHz on the RF and LO ports with an IF from DC to 3 GHz.
- MMIQ-0218HXPC
- Marki Microwave
-
1:
€1,908.15
-
1Expected 11/02/2027
-
New At Mouser
|
Mouser Part No
10-MMIQ-0218HXPC
New At Mouser
|
Marki Microwave
|
Signal Conditioning MMIQ-0218H is a low LO drive, passive GaAs MMIC IQ mixer that operates across a 9:1 bandwidth. This is an ultra-broadband mixer spanning 2 to 18GHz on the RF and LO ports with an IF from DC to 3 GHz.
|
|
1Expected 11/02/2027
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Signal Conditioning The MMIQ-0416H is a high linearity, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 4 to 16 GHz on the RF and LO ports with an IF from DC to 6 GHz.
- MMIQ-0416HS
- Marki Microwave
-
1:
€1,908.15
-
1Expected 27/10/2026
-
New At Mouser
|
Mouser Part No
10-MMIQ-0416HS
New At Mouser
|
Marki Microwave
|
Signal Conditioning The MMIQ-0416H is a high linearity, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 4 to 16 GHz on the RF and LO ports with an IF from DC to 6 GHz.
|
|
1Expected 27/10/2026
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Signal Conditioning The MMIQ-0416L is a low LO drive, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 4 to 16 GHz on the RF and LO ports with an IF from DC to 6 GHz.
- MMIQ-0416LS
- Marki Microwave
-
1:
€2,112.62
-
1Expected 02/11/2026
-
New At Mouser
|
Mouser Part No
10-MMIQ-0416LS
New At Mouser
|
Marki Microwave
|
Signal Conditioning The MMIQ-0416L is a low LO drive, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 4 to 16 GHz on the RF and LO ports with an IF from DC to 6 GHz.
|
|
1Expected 02/11/2026
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Mixers
|
|
|
|
|
Connector
|
|
- 55 C
|
+ 100 C
|
|
|
|
|
Signal Conditioning MMIQ-0520L is a low LO drive, passive GaAs MMIC IQ mixer that operates down to an unrivaled +3 dBm LO drive level. This is an ultra-broadband mixer spanning 5 to 20GHz on the RF and LO ports with an IF from DC to 6 GHz.
- MMIQ-0520LS
- Marki Microwave
-
1:
€2,112.62
-
1Expected 29/01/2027
-
New At Mouser
|
Mouser Part No
10-MMIQ-0520LS
New At Mouser
|
Marki Microwave
|
Signal Conditioning MMIQ-0520L is a low LO drive, passive GaAs MMIC IQ mixer that operates down to an unrivaled +3 dBm LO drive level. This is an ultra-broadband mixer spanning 5 to 20GHz on the RF and LO ports with an IF from DC to 6 GHz.
|
|
1Expected 29/01/2027
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Mixers
|
|
|
|
|
Connector
|
|
- 55 C
|
+ 100 C
|
|
|
|
|
Signal Conditioning The MPDW-10110M2 is a mmWave 2-way Wilkinson power divider featuring high isolation in our connectorized miniature M2-package enabling operation up to 110 GHz. The MPDW-10110M2 is available as a 1.0mm connectorized module.
- MPDW-10110M2
- Marki Microwave
-
1:
€4,515.77
-
1Expected 09/04/2027
-
New At Mouser
|
Mouser Part No
10-MPDW-10110M2
New At Mouser
|
Marki Microwave
|
Signal Conditioning The MPDW-10110M2 is a mmWave 2-way Wilkinson power divider featuring high isolation in our connectorized miniature M2-package enabling operation up to 110 GHz. The MPDW-10110M2 is available as a 1.0mm connectorized module.
|
|
1Expected 09/04/2027
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Signal Conditioning The PBR-0006SMG is a 10 MHz to 6 GHz surface mount high isolation power combiner. This power combiner features a unique hand tuned construction that enables 35 dB typical isolation across the operational bandwidth.
- PBR-0006SMG
- Marki Microwave
-
1:
€226.96
-
10Expected 31/12/2026
-
New At Mouser
|
Mouser Part No
10-PBR-0006SMG
New At Mouser
|
Marki Microwave
|
Signal Conditioning The PBR-0006SMG is a 10 MHz to 6 GHz surface mount high isolation power combiner. This power combiner features a unique hand tuned construction that enables 35 dB typical isolation across the operational bandwidth.
|
|
10Expected 31/12/2026
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Power Combiners
|
10 MHz to 6 GHz
|
10 MHz to 6 GHz
|
|
|
SMD/SMT
|
|
|
|
|
|
|
|
Signal Conditioning A resistive 2-way power divider that features broadband operation from DC to 20 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
- PD-0020
- Marki Microwave
-
1:
€499.51
-
11On Order
-
New At Mouser
|
Mouser Part No
10-PD-0020
New At Mouser
|
Marki Microwave
|
Signal Conditioning A resistive 2-way power divider that features broadband operation from DC to 20 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
|
|
11On Order
On Order:
4 Expected 01/01/2027
7 Expected 13/01/2027
Factory Lead Time:
18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Power Dividers
|
0 Hz to 20 GHz
|
0 Hz to 20 GHz
|
|
50 Ohms
|
Connector
|
|
|
|
|
|
|
|
Signal Conditioning A resistive 2-way power divider that features broadband operation from DC to 40 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
- PD-0040
- Marki Microwave
-
1:
€642.55
-
2Expected 11/03/2027
-
New At Mouser
|
Mouser Part No
10-PD-0040
New At Mouser
|
Marki Microwave
|
Signal Conditioning A resistive 2-way power divider that features broadband operation from DC to 40 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
|
|
2Expected 11/03/2027
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Signal Conditioning 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications.
- PD-0140
- Marki Microwave
-
1:
€1,192.61
-
4On Order
-
New At Mouser
|
Mouser Part No
10-PD-0140
New At Mouser
|
Marki Microwave
|
Signal Conditioning 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications.
|
|
4On Order
On Order:
1 Expected 01/01/2027
3 Expected 29/01/2027
Factory Lead Time:
18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Power Dividers
|
|
|
|
50 Ohms
|
Connector
|
|
|
|
|
|
|
|
Signal Conditioning 4-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications. These power dividers are realized as a cascade of two 1:2 Wilkinson power dividers integrated into a single package.
- PD4-0140
- Marki Microwave
-
1:
€3,066.68
-
1Expected 02/04/2027
-
New At Mouser
|
Mouser Part No
10-PD4-0140
New At Mouser
|
Marki Microwave
|
Signal Conditioning 4-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications. These power dividers are realized as a cascade of two 1:2 Wilkinson power dividers integrated into a single package.
|
|
1Expected 02/04/2027
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Signal Conditioning The T3-1040G is a high performance mixer featuring LO/RF from 10 to 40 GHz and IF from 1 to 18 GHz.
- T3-1040GLN
- Marki Microwave
-
1:
€1,628.76
-
2Expected 13/01/2027
-
New At Mouser
|
Mouser Part No
10-T3-1040GLN
New At Mouser
|
Marki Microwave
|
Signal Conditioning The T3-1040G is a high performance mixer featuring LO/RF from 10 to 40 GHz and IF from 1 to 18 GHz.
|
|
2Expected 13/01/2027
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Mixers
|
|
10 GHz to 40 GHz
|
|
|
Connector
|
|
- 55 C
|
+ 100 C
|
|
|
|
|
Signal Conditioning The T3-18G is a high performance mixer featuring LO/RF from 10 MHz to 18 GHz and IF from 1 MHz to 10 GHz.
- T3-18GLS
- Marki Microwave
-
1:
€1,628.76
-
1On Order
-
New At Mouser
|
Mouser Part No
10-T3-18GLS
New At Mouser
|
Marki Microwave
|
Signal Conditioning The T3-18G is a high performance mixer featuring LO/RF from 10 MHz to 18 GHz and IF from 1 MHz to 10 GHz.
|
|
1On Order
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Mixers
|
|
10 MHz to 18 GHz, 1 MHz to 10 GHz
|
|
50 Ohms
|
Connector
|
|
- 55 C
|
+ 100 C
|
|
|
|
|
Signal Conditioning The T3-20G is a high performance mixer featuring LO/RF from 10 MHz to 20 GHz and IF from 1 MHz to 10 GHz.
- T3-20GLS
- Marki Microwave
-
1:
€1,628.76
-
2Expected 01/01/2027
-
New At Mouser
|
Mouser Part No
10-T3-20GLS
New At Mouser
|
Marki Microwave
|
Signal Conditioning The T3-20G is a high performance mixer featuring LO/RF from 10 MHz to 20 GHz and IF from 1 MHz to 10 GHz.
|
|
2Expected 01/01/2027
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Mixers
|
10 MHz to 20 GHz
|
10 MHz to 20 GHz
|
|
|
Connector
|
|
- 55 C
|
+ 100 C
|
|
|
|
|
Signal Conditioning The MBAL-0104SM is a GaAs passive MMIC balun in a 4mm QFN surface mount package. It features excellent amplitude and phase balance across its 1 to 4 GHz frequency range that offers a 1:2 impedance ratio.
- MBAL-0104SM
- Marki Microwave
-
1:
€53.58
-
23Expected 02/11/2026
-
New At Mouser
|
Mouser Part No
10-MBAL-0104SM
New At Mouser
|
Marki Microwave
|
Signal Conditioning The MBAL-0104SM is a GaAs passive MMIC balun in a 4mm QFN surface mount package. It features excellent amplitude and phase balance across its 1 to 4 GHz frequency range that offers a 1:2 impedance ratio.
|
|
23Expected 02/11/2026
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Baluns
|
1 GHz to 4 GHz
|
1 GHz to 4 GHz
|
|
|
SMD/SMT
|
|
- 65 C
|
+ 125 C
|
|
|
|
|
Signal Conditioning The MFBP-00080CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00080CSP3 is available in our 3.5 x 3.5mm CSP3 chip scale package.
- MFBP-00080CSP3
- Marki Microwave
-
1:
€110.56
-
15Expected 19/11/2026
-
New Product
|
Mouser Part No
10-MFBP-00080CSP3
New Product
|
Marki Microwave
|
Signal Conditioning The MFBP-00080CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00080CSP3 is available in our 3.5 x 3.5mm CSP3 chip scale package.
|
|
15Expected 19/11/2026
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
|
|
|
|
|
|
|
|
Waffle
|
|
|
|
Signal Conditioning The MFBP-00137PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00137PSM features a 7.7-12.8GHz 1dBc passband and 1.8dB center frequency insertion loss.
- MFBP-00137PSM
- Marki Microwave
-
1:
€110.56
-
12Expected 19/02/2027
-
New Product
|
Mouser Part No
10-MFBP-00137PSM
New Product
|
Marki Microwave
|
Signal Conditioning The MFBP-00137PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00137PSM features a 7.7-12.8GHz 1dBc passband and 1.8dB center frequency insertion loss.
|
|
12Expected 19/02/2027
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Signal Conditioning A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 10 GHz bandwidth.
- BALH-0010
- Marki Microwave
-
1:
€1,056.31
-
1Expected 01/02/2027
-
New At Mouser
|
Mouser Part No
10-BALH-0010
New At Mouser
|
Marki Microwave
|
Signal Conditioning A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 10 GHz bandwidth.
|
|
1Expected 01/02/2027
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
|
|
|
|
|
|
|
|
|
|
