|
|
SparkFun Accessories This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST connector on one end bare cable on the opposite end. It also comes with the mating connector for the JST.
- PRT-09915
- SparkFun
-
1:
€1.68
-
46In Stock
|
Mouser Part No
474-PRT-09915
|
SparkFun
|
SparkFun Accessories This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST connector on one end bare cable on the opposite end. It also comes with the mating connector for the JST.
|
|
46In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories BNC connectors are ideal for quick connects to audio coax and high-frequency signal lines. This is a right-angle connector and comes with a lock washer and nut.Hookup / Related ProductSMA to BMC Male Cable RG316 - 1m
- PRT-10550
- SparkFun
-
1:
€2.41
-
15In Stock
|
Mouser Part No
474-PRT-10550
|
SparkFun
|
SparkFun Accessories BNC connectors are ideal for quick connects to audio coax and high-frequency signal lines. This is a right-angle connector and comes with a lock washer and nut.Hookup / Related ProductSMA to BMC Male Cable RG316 - 1m
|
|
15In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using solder like the stained glass on Tiffany lamp
- PRT-10561
- SparkFun
-
1:
€5.46
-
110In Stock
|
Mouser Part No
474-PRT-10561
|
SparkFun
|
SparkFun Accessories Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using solder like the stained glass on Tiffany lamp
|
|
110In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories These are standard 0.1" spaced header pins that can be through-hole mounted. This header connects perfectly with most 6-pin male headers.This is a 6-Pin female header.Documents:Datasheet
- PRT-11894
- SparkFun
-
1:
€0.688
-
94In Stock
|
Mouser Part No
474-PRT-11894
|
SparkFun
|
SparkFun Accessories These are standard 0.1" spaced header pins that can be through-hole mounted. This header connects perfectly with most 6-pin male headers.This is a 6-Pin female header.Documents:Datasheet
|
|
94In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a 2x23 pin male PTH header. This piece is in the common configuration for Beaglebone Black headers that can be broken apart to form smaller header formations. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet
- PRT-12791
- SparkFun
-
1:
€1.15
-
6In Stock
|
Mouser Part No
474-PRT-12791
|
SparkFun
|
SparkFun Accessories This is a 2x23 pin male PTH header. This piece is in the common configuration for Beaglebone Black headers that can be broken apart to form smaller header formations. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet
|
|
6In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories You'll have no need for a screwdriver with this terminal! This is a 3-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.19" spacing. Please note that the pins are thick enough (1.20mm
- PRT-15899
- SparkFun
-
1:
€1.63
-
7In Stock
|
Mouser Part No
474-PRT-15899
|
SparkFun
|
SparkFun Accessories You'll have no need for a screwdriver with this terminal! This is a 3-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.19" spacing. Please note that the pins are thick enough (1.20mm
|
|
7In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is your basic spool of lead free solder with a water soluble resin core. 0.031" gauge and 100 grams. This is a good spool for more advanced users that should last 6-12 months depending on how often you solder. If you are just beginning to solde
- TOL-09325
- SparkFun
-
1:
€23.71
-
2In Stock
|
Mouser Part No
474-TOL-09325
|
SparkFun
|
SparkFun Accessories This is your basic spool of lead free solder with a water soluble resin core. 0.031" gauge and 100 grams. This is a good spool for more advanced users that should last 6-12 months depending on how often you solder. If you are just beginning to solde
|
|
2In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories These needle tipped multimeter probes are great for attaching to multimeters power supplies oscilloscopes function generators etc. Not only can these make a good replacement for any multimeter probes you have now that are damaged or worn but tha
- TOL-12078
- SparkFun
-
1:
€5.98
-
1In Stock
-
32Expected 28/10/2026
|
Mouser Part No
474-TOL-12078
|
SparkFun
|
SparkFun Accessories These needle tipped multimeter probes are great for attaching to multimeters power supplies oscilloscopes function generators etc. Not only can these make a good replacement for any multimeter probes you have now that are damaged or worn but tha
|
|
1In Stock
32Expected 28/10/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Optical Sensor Development Tools A simple breakout PCB for the GP1A57HR photo interrupter (also known as a photogate photodiode or phototransistor). This PCB has three connections for PWR GND and Signal.When the gate is clear SIG will be high (>4.9V). When the gate is blocked b
- BOB-09322
- SparkFun
-
1:
€1.64
-
417In Stock
|
Mouser Part No
474-BOB-09322
|
SparkFun
|
Optical Sensor Development Tools A simple breakout PCB for the GP1A57HR photo interrupter (also known as a photogate photodiode or phototransistor). This PCB has three connections for PWR GND and Signal.When the gate is clear SIG will be high (>4.9V). When the gate is blocked b
|
|
417In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Development Boards & Kits - ARM With a 32-bit ARM Cortex -M4 RISC core the SparkFun STM32 Thing Plus brings power and precision to your projects. The STM32 Thing Plus provides you with an economical and easy to use development platform if you're needing more power with a minim
- DEV-17712
- SparkFun
-
1:
€39.26
-
17In Stock
|
Mouser Part No
474-DEV-17712
|
SparkFun
|
Development Boards & Kits - ARM With a 32-bit ARM Cortex -M4 RISC core the SparkFun STM32 Thing Plus brings power and precision to your projects. The STM32 Thing Plus provides you with an economical and easy to use development platform if you're needing more power with a minim
|
|
17In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
NFC/RFID Development Tools RFID Tag (125kHz)
- COM-14325
- SparkFun
-
1:
€2.37
-
64In Stock
|
Mouser Part No
474-COM-14325
|
SparkFun
|
NFC/RFID Development Tools RFID Tag (125kHz)
|
|
64In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Enclosures for Single Board Computing This MI:pro Protector Case for the BBC micro:bit has been designed to work with both the original micro:bit V1 and the micro:bit V2. These cases feature a four-layer construction style with ability to mount a 2xAAA battery pack to the back of the cas
- PRT-17867
- SparkFun
-
1:
€6.55
-
5In Stock
|
Mouser Part No
474-PRT-17867
|
SparkFun
|
Enclosures for Single Board Computing This MI:pro Protector Case for the BBC micro:bit has been designed to work with both the original micro:bit V1 and the micro:bit V2. These cases feature a four-layer construction style with ability to mount a 2xAAA battery pack to the back of the cas
|
|
5In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
DC Motors These are a pair of right angle hobby gearmotors from DAGU. These gearmotors are the same ones utilized in the Magician Chassis and RedBot Kit and offer a cheap and easy to use setup to get your wheels turning. Due to these gear motors being at a ri
- ROB-13258
- SparkFun
-
1:
€8.31
-
10In Stock
|
Mouser Part No
474-ROB-13258
|
SparkFun
|
DC Motors These are a pair of right angle hobby gearmotors from DAGU. These gearmotors are the same ones utilized in the Magician Chassis and RedBot Kit and offer a cheap and easy to use setup to get your wheels turning. Due to these gear motors being at a ri
|
|
10In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Board Mount Motion & Position Sensors The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and 'tap' inputs from a user. A small AC and large voltage (up
- SEN-09198
- SparkFun
-
1:
€14.01
-
24In Stock
|
Mouser Part No
474-SEN-09198
|
SparkFun
|
Board Mount Motion & Position Sensors The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and 'tap' inputs from a user. A small AC and large voltage (up
|
|
24In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Modules XBee RR 802.15.4 RF Modules are embedded solutions providing wireless end-point connectivity to devices. These devices use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. They are designed for high-throu
- WRL-22629
- SparkFun
-
1:
€43.54
-
1In Stock
|
Mouser Part No
474-WRL-22629
|
SparkFun
|
RF Modules XBee RR 802.15.4 RF Modules are embedded solutions providing wireless end-point connectivity to devices. These devices use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. They are designed for high-throu
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Zigbee Development Tools - 802.15.4 XBee Shield
- WRL-12847
- SparkFun
-
1:
€18.63
-
38In Stock
|
Mouser Part No
474-WRL-12847
|
SparkFun
|
Zigbee Development Tools - 802.15.4 XBee Shield
|
|
38In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Terminals Quick Disconnects- Female 1/4 Pk of 5
- PRT-14407
- SparkFun
-
1:
€0.516
-
348In Stock
|
Mouser Part No
474-PRT-14407
|
SparkFun
|
Terminals Quick Disconnects- Female 1/4 Pk of 5
|
|
348In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Educational Kits We love heat shrink! We use it for all sorts of handy projects. Use it to reinforce connections protect devices and electrically isolate exposed solder joints. We worked with a manufacturer to create a kit that we would use: lots of colors lots of
- PRT-09353
- SparkFun
-
1:
€9.42
-
24In Stock
|
Mouser Part No
474-PRT-09353
|
SparkFun
|
Educational Kits We love heat shrink! We use it for all sorts of handy projects. Use it to reinforce connections protect devices and electrically isolate exposed solder joints. We worked with a manufacturer to create a kit that we would use: lots of colors lots of
|
|
24In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
LED Lighting Development Tools Do not look into the light. You know you want to but boy will you be sorry. 1W per channel RGB High Power LEDs in one aluminum backed package. These LEDs will blow you away. Light them up then put a coffee cup over the LED to keep your eyes from se
- COM-15200
- SparkFun
-
1:
€6.20
-
26In Stock
|
Mouser Part No
474-COM-15200
|
SparkFun
|
LED Lighting Development Tools Do not look into the light. You know you want to but boy will you be sorry. 1W per channel RGB High Power LEDs in one aluminum backed package. These LEDs will blow you away. Light them up then put a coffee cup over the LED to keep your eyes from se
|
|
26In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Magnetic/Reed Switches This is a small device called a reed switch. When the device is exposed to a magnetic field the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed the reeds separate and the switch opens.
- COM-10601
- SparkFun
-
1:
€3.11
-
8In Stock
|
Mouser Part No
474-COM-10601
|
SparkFun
|
Magnetic/Reed Switches This is a small device called a reed switch. When the device is exposed to a magnetic field the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed the reeds separate and the switch opens.
|
|
8In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Board Mount Motion & Position Sensors The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and 'tap' inputs from a user. A small AC and large voltage (up
- SEN-09199
- SparkFun
-
1:
€14.01
-
3In Stock
|
Mouser Part No
474-SEN-09199
|
SparkFun
|
Board Mount Motion & Position Sensors The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and 'tap' inputs from a user. A small AC and large voltage (up
|
|
3In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Headers & Wire Housings This is a 2x18 pin female header. Each pin has a spacing of 0.1" in-between each other.This header mates perfectly with the Alchitry Br Prototype Element Board.
- PRT-16581
- SparkFun
-
1:
€2.43
-
87In Stock
|
Mouser Part No
474-PRT-16581
|
SparkFun
|
Headers & Wire Housings This is a 2x18 pin female header. Each pin has a spacing of 0.1" in-between each other.This header mates perfectly with the Alchitry Br Prototype Element Board.
|
|
87In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Enclosures for Single Board Computing The Mountable MI:pro is a simple and compact protective case for the micro:bit. This case has been specifically designed with portability and expansion in mind and is compatible with both the original micro:bit V1 and the micro:bit V2. These cases fe
- PRT-17868
- SparkFun
-
1:
€5.40
-
8In Stock
|
Mouser Part No
474-PRT-17868
|
SparkFun
|
Enclosures for Single Board Computing The Mountable MI:pro is a simple and compact protective case for the micro:bit. This case has been specifically designed with portability and expansion in mind and is compatible with both the original micro:bit V1 and the micro:bit V2. These cases fe
|
|
8In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
WiFi Development Tools - 802.11 SparkFun ESP8266 Thing Dev Board
- WRL-13804
- SparkFun
-
1:
€17.42
-
4In Stock
|
Mouser Part No
474-WRL-13804
|
SparkFun
|
WiFi Development Tools - 802.11 SparkFun ESP8266 Thing Dev Board
|
|
4In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
NFC/RFID Tags & Transponders This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
- SEN-11319
- SparkFun
-
1:
€5.08
-
6In Stock
|
Mouser Part No
474-SEN-11319
|
SparkFun
|
NFC/RFID Tags & Transponders This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
|
|
6In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
